How to distinguish gold from gold plated jewelry?
I try to learn to distinguish solid 10K, 14k, 18K gold jewelry from gold plated or gold filled jewelry. What is the method?
Tags: gold
I try to learn to distinguish solid 10K, 14k, 18K gold jewelry from gold plated or gold filled jewelry. What is the method?
Tags: gold
July 28th, 2010 at 7:44 pm
should say 14k, or 10k. ingraved inside the ring.
July 28th, 2010 at 10:49 pm
it should tell you on the piece. gold is marked and if it is not printed some where (like the clasp) it is probably gold plate.
July 29th, 2010 at 12:45 am
The lack of a hallmark (10k, 14k, 18k etc.) is not indicative of whether your piece is gold or not. In the United States it is against the FTC’s regulations for the jeweler to hallmark a piece of jewelry unless it is accompanied by a maker’s mark. So, when I first began making jewelry and did not have a trademark of my own, I did not hallmark my jewelry. Now that I have a maker’s mark, I hallmark my jewelry with the appropriate metal hallmark and my maker’s mark.
A jeweler cannot just look at a piece and tell you for certain whether it is gold or not; the jeweler will do a test to determine it.
To be scientfically accurate a sample of the metal in question must be assayed in a testing laboratory, but the following two tests have been used for many years and often are sufficiently accurate for a craftsperson or the owner of the metal in question.
To answer “Is It Gold?”:
With a small file, make a scratch in an inconspicuous spot. While wearing rubber gloves, use a wooden, glass or plastic stick to apply a drop of nitric acid to the filed spot. Observe the reaction. When done, rinse everything well in running water.
If there is no reaction, it’s gold.
If there’s a bright green reaction, it’s base metal.
If there’s green in the scratch, it’s a gold layer over base metal (goldplate, or–if the layer of gold is thick enough–goldfilled).
If there’s a milky reaction in the scratch, it’s a gold layer over silver.
To answer “What Karat Is It?”
Determining karat requires a testing kit containing nitric acid, aqua regia, samples of known karat, and a touchstone of slate or ceramic.
The gold object to be tested is rubbed on the stone (“touched”) to leave a streak. A parallel line is made with one of the test pieces of known karat. Both marks are flooded with acid and the reaction are observed. When the sample colors at the same rate as the test streak, a match has been made. Nitric acid is used for low karat golds; aqua regia is needed for higher karats.
Please note: these tests are for your information only. They are not accurate enough to rely upon when representing a piece for sale. Most jewelers have testing kits to use when determining if something is gold or not and its approximate karat. It is probably easiest to take the item to a jeweler than to set up the testing kits yourself.
July 29th, 2010 at 1:37 am
BITE IT!
•••••••••••∑)
CHOMP!